Victron Energy Smart LiFePO4 Lithium Component Battery
Victron Smart Lithium LiFePO4 12.8V/330AH Component Battery
Victron Energy's Smart LFP component (not "drop-in") battery in this new 12.8V/330AH form factor is absolutely groundbreaking in capacity-per-square inch of footprint!
Please note: These batteries are component battery systems, and require multiple other parts to function - see below. Professional installation is required; please have your installer contact us prior to ordering to demonstrate a working knowledge of the Victron Energy Component Battery environment.
Please select your delivery method (pick up or shipped); if ordering 3 or more batteries for shipment to an address that can accept a palletized freight shipment, we will refund the difference in shipping cost!
265H x 359W x 206D
10.43" H x 14.13"W x 8.11"D
We're sorry, we cannot ship lithium batteries to Alaska, Hawaii, or Puerto Rico.
**PLEASE NOTE: These are component battery systems, NOT "DROP-IN" batteries. These MUST NOT BE USED without the required BMS, load disconnects, and charge disconnects, as well as possible other components depending on the rest of your system. THESE MUST BE PROFESSIONALLY INSTALLED BY VICTRON-TRAINED INSTALLERS. To order, please have your installer contact us to demonstrate a working knowledge of the proper installation methods and requirements**
Victron Energy's Smart component lithium batteries have integrated cell balancing and cell monitoring, and require the use one of Victron's components battery management systems (BMS) to manage the batteries. Up to ten batteries can be paralleled and up to four batteries can be series connected, so that a 48V battery bank of up to 3000Ah can be assembled. The cell balancing/monitoring cables can be daisychained and must be connected to a Victron Energy Battery Management System (BMS).
The BMS will:
- Disconnect or shut down the load whenever the voltage of a battery cell falls to less than 2.5V.
- Stop the charging process whenever the voltage of a battery cell increases to more than 4.2V.
- Shut down the system whenever the temperature of a cell exceeds 50°C.
- Control the cell balancing while charging and discharging
A complete Victron Energy Smart Component LFP Battery System consists of:
• One or more Victron Energy Smart LFP component batteries
• Victron Energy BMS
• Charge relay, typically one of the Cyrix-Li-Charge series
• Load relay, either the Cyrix-Li-Load or one of the Smart BatteryProtect models
• Digital Multi Control (may or may not be necessary depending on the rest of the system)
• (optional) Cerbo GX with GX Touch 50 or GX Touch 70 Accessory Screen
• Cables including Victron Energy RJ45 UTP cables and others as necessary
**Please note: Batteries are non-returnable except in case of warranty claim, in which case you must contact us for return authorization, RMA form, and shipping instructions**