Victron Energy Phoenix 250VA Pure Sine Inverter with VE.Direct

Victron Energy Phoenix 250VA Pure Sine Inverter with VE.Direct

Rating:
0%
As low as $96.90
In stock
Only %1 left
SKU
VE-INV-250

The Victron Energy Phoenix 250VA Pure Sine Inverter with VE.Direct is a compact and reliable inverter for up to 200W continuous with mixed loads, and is compatible with the optional Victron Energy VE.Direct Bluetooth Dongle for eay configuration and monitoring! Available in both 12V and 24V models; select your input voltage above!

The Victron Energy Phoenix-series inverters are competitively priced yet efficient and built to last. One of the specifications we're asked about on smaller inverters is the no-load power consumption, and this is one of the areas where the Victron Phoenix really shines, with about half the consumption of the closest competition. A search mode lowers it even more, to an amazing 0.8 to 1.0 watts. That's just one example of the engineering that has gone into these quality inverters.

If you really need to rely on your inverter, or you're just tired of tossing your budget models in the trash every few years, we highly recommend these.

VE.Direct communication port can be connected to:
• A computer (VE.Direct to USB interface cable needed)
• Apple and Android smartphones, tablets, MacBooks and other devices (VE.Direct Bluetooth Smart Dongle needed)

Fully configurable:
• Low battery voltage alarm trip and reset levels
• Low battery voltage cut-off and restart levels
• Dynamic cut-off: load dependent cut-off level
• ECO mode on/off and ECO mode sense level

Monitoring:
• Input and output voltage, % load, and alarms

Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit-proof and protected against overheating, whether due to overload or high ambient temperature.

High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.

Built-in protection
All models feature low battery voltage, high battery voltage, high temperature, overload, and short circuit protection.

Reliability
All Victron products (except batteries) come with a 5-year worldwide warranty, supported by an global network of service points and dealers.

 

 Phoenix Inverter Model

12/250
24/250
48/250

12/375
24/375
48/375
12/500
24/500
48/500
12/800
24/800
48/800
Model #: (12V Models) PIN122510500 PIN123750500 PIN125010500 PIN0128010500
Continuous power at 25°C 250 VA 375 VA 500 VA 800 VA
Continuous power at 25°C / 40°C 200 / 175W 300 / 260W 400 / 350W 650 / 560W
Peak power 400W 700W 900W 1500W
Output AC 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0.1%
Input Voltage Range 9.2 - 17 / 18.4 - 34.0 / 36.8 - 62.0V
DC low shut down (adjustable) 9.3 / 18.6 / 37.2V
DC low restart and alarm (adjustable) 10.9 / 21.8 / 43.6V
Battery charged detect (adjustable) 14.0 / 28.0 / 56.0V
Maximum efficiency 87 / 88 / 88% 88 / 89 / 90% 90 / 90 / 91% 90 / 90 / 91%
Zero load power 4.2 / 5.2 / 7.9W 5.6 / 6.1 / 8.5W 6 / 6.5 / 9W 6.5 / 7 / 9.5W
Default zero-load power in ECO mode 0.8 / 1.3 / 2.5W 0.9 / 1.4 / 2.6W 1 / 1.5 / 3.0W 1 / 1.5 / 3.0W
Battery connection Screw Terminals
Maximum cable cross-section 10 mm² / AWG8 10 mm² / AWG8 10 mm² / AWG8 25 mm² / AWG4
Weight 2.4 kg / 5.3 lb 3.0 kg / 6.6 lb 3.9 kg / 8.5 lb 5.5 kg / 12 lb
Dimensions
(hxwxd, mm)
(hxwxd, inch)
86 x 165 x 260 mm
3.4 x 6.5 x 10.2 inch
86 x 165 x 260 mm
3.4 x 6.5 x 10.2 inch
86 x 172 x 275 mm
3.4 x 6.8 x 10.8 inch
105 x 216 x 305 mm
4.1 x 8.5 x 12.1 inch
(12V model:
105 x 230 x 325 mm)