Victron MK3-USB-C Interface
Victron MK3-USB-C Interface
The Victron Energy MK3-USB-C Interface is the required accessory for connecting a Victron Energy VE.Bus device such as MultiPlus or Quattro inverter/chargers and the Phoenix VE.Bus inverters to a Windows or Apple computer to allow programming and firmware updating through the VictronConnect desktop application or to a USB C-equipped phone - same as the MK3-USB Interface but now with a USB-C connector instead of USB-A!
Please note that a Victron Energy RJ45 UTP cable will also be required (not included).
PN ASS030140030
The Victron Energy MK3-USB-C Interface is a required component for performing system programming and firmware updates to your VE.Bus device from your Windows or Apple computer or USB C-equipped phone using the VictronConnect desktop application, or Windows-only computers using the VE.Configure application. Check with your installer, however, as most Victron-certified systems installers will have their own MK3 that they will use to program your system during installation.
This model is the same as the MK3-USB Interface except now with a USB-C connection instead of USB-A!
Please note that a Victron Energy RJ45 UTP cable is required (not included) to connect the MK3 to your VE.Bus device; depending on your system, you may be able to use your existing Victron RJ45 UTP cable that connects your VE.Bus device to your Digital Multi Control or GX device.