• $8.95 Shipping

    Anywhere in the lower 48, except oversize items

(0 item) - $0.00

You have no items in your shopping cart.


Victron Centaur battery charger

More Views

  • Victron Centaur battery charger

Victron Centaur 12 Volt 40 Amp Battery Charger

Part # CCH012040000

Availability: In stock

Product Description


    Victron Centaur battery chargers are heavy-duty, analog control, no-nonsense devices for serious installations. The cases are of epoxy powder coated aluminium, with stainless steel hardware. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Centaurs weigh about a third more than most modern chargers, and are supported by an outstanding 5-year worldwide warranty.

    These Victron chargers accept 90-265 (50/60hz) volts AC input for worldwide use. Three isolated outputs can simultaneously charge 3 battery banks, and each leg is capable of supplying the full rated current. An analog current meter diplays the output current. A dip switch is used to select battery type: flooded Lead-acid, gel or AGM. Temperature compensation is via a sensor in the charger that senses ambient temperature and adjusts the output voltage as needed. There is no remote sensor.

    The Victron Centaur battery chargers are stand-alone devices, and do not connect to Victron's network system.

    Additional information:

    We highly recommend Victron's Energy Unlimited book to anyone who is working with battery storage systems.

    For more information, see the Centaur's Owner's Manual.

    Model Victron Centaur Battery Charger 12 Volt 40 Amp   
    Part number CCH012040000
    Input voltage range 90-265 VAC
    Input frequency  45-65 Hz
    Battery types 3 presets for flooded, gel, AGM
    Total output 40 amps
    Output banks 3
    Display        Output current, analog display
    Temperature sensor Internal
    Protection Output short circuit, over temperature
    Forced air cooling Yes, temperature and current controlled fan 
    Operating temp range 0° - 140° F (-20° to 60° C)
    Ignition protected  Yes
    Material & Color  Aluminium (blue RAL 5012)
    Battery connection  5/16" (8mm) studs
    AC connection Screw-clamp for AWG 10 (4 mm²) wire
    Protection category IP 21 (dripping water, upright)
    Weight 11 lbs (5 kg)
    Dimensions 16.8" x 9.4" x 5.3" (426 x 239 x 135 mm) 

Additional Information

    Additional Information

    Manufacturer Victron Energy
    Data Sheet No
    Product Manual No
Bay Marine Supply
3235 Hancock St # 12 San Diego, VA CA 92110
Phone: 619-320-5899