• $8.95 Shipping

    Anywhere in the lower 48, except oversize items

(0 item) - $0.00

You have no items in your shopping cart.

section

Victron BMV-712 Smart Battery Monitor with Built-In Bluetooth

More Views

Victron BMV-712 Smart Battery Monitor with Built-In Bluetooth

SKU: VIC-BMV-712
Model #:
BAM030712000R

• Always know the state of your battery
• State of Charge read-out
• Very easy to install
• Estimates time-to-go
• Automatically determines nominal voltage
• Stores historic data

Availability: In stock

$206.55
Product Description

    Details

    Built similarly and with all the functions of it's predecessor, the BMV-702. Victron included a built-in bluetooth to it's BMV-712 Smart Battery Monitor. Giving users the ability to access important information from their battery monitor via a smart phone. Like any good battery monitor, it allows you to better maintain your batteries and track your energy usage and charging systems. The monitors pay for themselves many times over, and we can't imagine being without them on any battery-based system. When an independent, stand-alone system is desired, the Victron BMV series is an excellent choice.


    Bluetooth inside
    With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance.


    Download the Victron Bluetooth app
    Use a smartphone or other Bluetooth enabled device to
    - customize settings
    - monitor all important data on single screen
    - view historical data
    - update the software when new features become available


    Easy to install
    All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed. Also included are a separate front bezel for a square or round display appearance, a securing ring for rear mounting and screws for front mounting.


    Midpoint voltage monitoring
    One bad cell or one bad battery can destroy a large, expensive battery bank. When batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. Please see the BMV manual, section 5.2, for more information. We recommend our Battery Balancer (BMS012201000) to maximize service life of series connected lead-acid batteries.


    Very low current draw from the battery
    Current consumption: 0.7Ah per month (1mA) @12V and 0.6Ah per month (0.8mA) @ 24V
    Especially Li-ion batteries have virtually no capacity left when discharged until low voltage shutdown. After shutdown due to low cell voltage, the capacity reserve of a Li-ion battery is approximately 1Ah per 100Ah battery capacity. The battery will be damaged if the remaining capacity reserve is drawn from the battery. A residual current of 10mA for example may damage a 200Ah battery if the system is left in discharged state during more than 8 days


    Bi-stable alarm relay
    Prevents increased current draw in case of an alarm


    Other features
    - Battery voltage, current, power, ampere-hours consumed and state of charge
    - Remaining time at the current rate of discharge
    - Programmable visual and audible alarm
    - Programmable relay, to turn off non critical loads or to run a generator when needed
    - 500 Amp quick connect shunt and connection kit
    - Shunt selection capability up to 10.000 Amps
    - VE.Direct communication port
    - Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health
    - Wide input voltage range: 9.5 – 95V
    - High current measurement resolution: 10 mA (0.01A)
    - Additional input to measure voltage (of a second battery), temperature or midpoint voltage, and corresponding alarm and relay settings.


    Battery Monitor BMV-712 Smart
    Supply voltage range 6.5 - 95 VDC
    Current draw, back light off < 1mA
    Input voltage range, auxiliary battery 6.5 - 95 VDC
    Battery capacity (Ah) 20 - 9999 Ah
    Operating temperature range -40 - 50°C (-40 - 120°F)
    Measures voltage of second battery,
    or temperature, or midpoint
    Yes
    Temperature measurement range -20 - 50°C
    VE.Direct communication port Yes
    Bistable relay 60V / 1A normally open (function can be inverted)
    RESOLUTION & ACCURACY (with a 500 A shunt)
    Current ± 0.01A
    Voltage ± 0.01V
    Amp hours ± 0.1 Ah
    State of charge (0 – 100%) ± 0.1%
    Time to go ± 1 min
    Temperature (0 - 50°C or 30 - 120°F) ± 1°C/°F
    Accuracy of current measurement ± 0.4%
    Accuracy of voltage measurement ± 0.3%
    INSTALLATION & DIMENSIONS
    Installation Flush mount
    Front 63mm diameter
    Front bezel 69 x 69 mm (2.7 x 2.7 inch)
    Body diameter 52 mm (2.0 inch)
    Body depth 31 mm (1.2 inch)
    ACCESSORIES
    Shunt (included) 500A / 50mV
    Cables (included) 10 meter 6 core UTP with RJ12 connectors,
    and cable with fuse for ‘+’ connection
    Temperature sensor Optional (ASS000100000)

    You can view and capture real-time and historical data from the BMV-700 to a Windows computer with the VE.Direct to USB interface.

    All Victron products come with a 5 year worldwide warranty, supported by an international network of service points and dealers.

Additional Information

    Additional Information

    Manufacturer Victron Energy
    Data Sheet BMV-712 Smart Battery Monitor with Bluetooth
    Product Manual BMV-700, BMV-700H, BMV-702, BMV-712
    Warranty 5 Years Limited Warranty on all products
    2 Years LImited Warranty for Batteries
Bay Marine Supply
3235 Hancock St # 12 San Diego, VA CA 92110
Phone: 619-320-5899