Victron Energy ArgoFET Battery Isolator

Victron Energy ArgoFET Battery Isolator

Rating:
0%
As low as $100.30
In stock
Only %1 left
SKU
VE-ARGOFET

100-200 Amp Input with 2 or 3 Battery Outputs.

Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0.02 volt at low current and averages 0.1 volt at higher currents.

Some alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage/current from the batteries to the B+, and the alternator will not start. The new Argofet isolators have a special current limited energize input that will power the B+ when the engine run/stop switch is closed.

Argo FET Battery Isolator 100-2 100-3 200-2 200-3
Maximum charge current (A) 100 100 200 200
Maximum alternator current (A) 100 100 200 200
Number of batteries 2 3 2 3
Connection M8 bolts M8 bolts M8 bolts M8 bolts
Weight kg (lbs) 1.4 kg (3.1 lbs) 1.4 kg (3.1 lbs) 1.4 kg (3.1 lbs) 1.4 kg (3.1 lbs)
Dimensions h/w/d 65 x 120 x 200 mm
2.6 x 4.7 x 7.9 inches
65 x 120 x 200 mm
2.6 x 4.7 x 7.9 inches
65 x 120 x 200 mm
2.6 x 4.7 x 7.9 inches
65 x 120 x 200 mm
2.6 x 4.7 x 7.9 inches