• $8.95 Shipping

    Anywhere in the lower 48, except oversize items

(0 item) - $0.00

You have no items in your shopping cart.




Performance, efficiency, and quality are hallmarks of Adler/Barbour ColdMachine Kits by Dometic. Two configurations are offered: The air-cooled CU-100 ColdMachine, and the air- and water-cooled CU-200 SuperColdMachine. Powered by a Danfoss BD50F compressor, these easy-to-install units provide up to 15 cu. ft. (424 liters) of refrigeration.

ColdMachine kits now come with self-sealing quick-connect fittings for easy attachment. Unlike the old “one-shot” connections, quick-connect fittings can be disconnected and reconnected whenever necessary without loss of refrigerant or exposing the system to air or moisture. Please download the spec sheet to read more about the five VD evaporator models available.

Installation of a Coldmachine kit is fairly straightforward, whether you're replacing an existing cooling unit, or converting your icebox or cabinet to a refrigerator or freezer. You'll need to choose between 2 compressor units, and a number of evaporators. The compressor is usually installed in the engine room or a vented cabinet, up to 15ft (4.5m) away from the 'fridge or freezer. The evaporator is installed in the insulated box and connected with the included tubing. Connect to a 12v power source, adjust the thermostat, and you're ready for a cool one.

Download the installation manual for more information.

  Bosun's Corner Some commonly asked questions
are in the Bosun's Corner.
Or, contact us directly.

Adler-Barbour can provide adapters for connecting the newer quick-connect fittings to the older one-shot connectors, should you wish to upgrade only part of your existing system. Call us for details.

Check out all of our other Component Systems.

There are no products matching the selection.

Bay Marine Supply
3235 Hancock St # 12 San Diego, VA CA 92110
Phone: 619-320-5899