• $8.95 Shipping

    Anywhere in the lower 48, except oversize items

(0 item) - $0.00

You have no items in your shopping cart.


Xantres TRUECharge marine and RV battery charger

More Views

  • Xantres TRUECharge marine and RV battery charger

Xantrex TRUECharge2 Battery Charger

3-bank output, stackable

Availability: In stock


* Required Fields

Product Description


    The Xantrex TRUECharge2 is an upgraded, modern 3-output, 3-stage battery charger with a number of advanced features for marine and RV use. It is light weight, small, and can be mounted either horizontally or vertically while maintaining it's drip-proof IP-32 rating. It has an available remote with LEDs indicating charge rate and warnings, and allows for on/off, battery type, and equalization control. An optional battery temperature sensor is available (part #: 808-0232-01), and highly recommended.

    There are 6 Xantrex TRUECharge2 models:
    Output Model #
    12 volts, 20 amps     804-1220-02
    12 volts, 40 amps 804-1240-02
    12 volts, 60 amps 804-1260-02
    24 volts, 10 amps 804-2410
    24 volts, 20 amps 804-2420
    24 volts, 30 amps 804-2430

    TRUECharge2 battery chargers are equipped with a parallel stacking feature. This allows two chargers to work together to combine the output current, achieving up to 120A for large battery banks. This requires the optional Remote Panel (part #808-8040-01).

    (Note: most pairs of battery chargers, if properly set up, will work together well, though not in a co-ordinated manner as with the TRUECharge2.)

      Xanterx TRUECharge2 features:
    • Settings for flooded, gel, AGM or lead-calcium batteries
    • Auto-ranging universal input voltage (90-265 Vac, 47-63 Hz)
    • Microprocessor-controlled, multistage charging algorithms
    • Settings for two and three-stage charging
    • Battery-equalization feature
    • Power factor corrected, temperature-compensated charging
    • Ability to charge batteries drained to extremely low voltage
    • Optional Battery temperature sensor (Part #808-0232-01)
    • Optional Remote Panel (part #808-8040-01)
    • Reverse battery polarity protection
    • Drip-proof design
    • DC over-voltage and under/over temperature protection

    General Specifications
    Banks: 3
     Output voltage - depending on settings:      
         Charge:  14.2-15.5V (12V) 
         Float: 13.4-13.8V (12V)
         Equalize:  16V (12V)
     Charger efficiency >80%
     Battery types Flooded, AGM, Gel, Pb-Ca
          12V 20-40A, 24V 10-20A 2.8" x 6.7" x 9.8" (70 x 170 x 250mm)
         12V 60A, 24V 30A 3.5" x 6.7" x 13.4” (90 x 170 x 340 mm)
          12V 20-40A, 24V 10-20A 4.8 lb (2.2 kg)
         12V 60A, 24V 30A 9.9 lb (4.5 kg)
    Warranty 2 years
         Remote Panel 808-8040-01
         Battery Temperature Sensor 808-0232-01
Additional Information

    Additional Information

    Manufacturer Xantrex
    Data Sheet No
    Product Manual No