• $8.95 Shipping

    Anywhere in the lower 48, except oversize items

(0 item) - $0.00

You have no items in your shopping cart.

section

Xantrex Freedom SW 2012 inverter charger

More Views

  • Xantrex Freedom SW 2012 inverter charger

Xantrex Freedom SW 2012 True Sine Inverter-Charger

SKU: XAN-SW2012
2000 watts of pure sine wave power for 12 volt applications.

Availability: In stock

$1,528.00
Product Description

    Details

    The Xantrex Freedom SW 2012 is designed for a variety of mobile applications such as commercial, emergency and recreational vehicles, marine vessels, construction and military equipment.

    The second generation Xantrex SW series inverter/chargers have been completely redesigned to include many of the same great features found in much more expensive models. A key enhancement is ‘Generator Support Mode’, which enables the Freedom SW 2012 or SW 3012 to supplement a generator when AC loads exceed the generator or shore power capacity, sometimes referred to as "hybrid operation". The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.

    Also new for the Freedom SW 2012 and SW 3012 - Parallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode. Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output. (AC source must be split phase; requires Stacking Cable part# 808-9005).

    Features:

    • Pure sine wave output to operate sensitive electronics 
    • Advanced configuration options for customized applications 
    • Parallel and series stacking capability 
    • Built-in transfer switch automatically transfers between inverter power and incoming AC power
    • Power factor corrected, multi-stage charger for fast, efficient charging
    • Temperature compensated charging for a vareity of climate conditions
    • Ignition lockout feature helps prevent unnecessary battery drain
    • Wide operating temperature range: -4°F to 140°F (-20°C to 60°C)
    • Conformal coated circuit boards for humid environments
    • Dual input / Dual output AC interface for 3000 W model
    • Ability to charge batteries drained to extremely low voltage 
    • Compatible with the Xantrex Automatic Generator Start**

    Protection:
    • Battery over-voltage and under-voltage protection
    • Over-temperature shutdown
    • Automatic overload protection
    • Short-circuit protection
    • Integrated, resettable AC breakers



    Electrical Specifications - Inverter Freedom SW 2012 (815-2012) Freedom SW 3012 (815-3012)
    Output power (continuous at 40°C) 2000 W 3000 W
    Surge rating (5 seconds) 4000 W 6000 W
    Peak output current 55 A 80 A
    Output frequency 60 Hz +/- 0.2 Hz 60 Hz +/- 0.2 Hz
    Output voltage 120 Volts AC 120 Volts AC
    Output wave form Pure sine wave Pure sine wave
    Optimal efficiency 90% 90%
    No-load power draw (inverting) 3 Amps DC 3 Amps DC
    Input DC voltage range 10 - 16 Volts DC 10 - 16 Volts DC
    AC connections Single phase in/out Split phase in / dual out, Dual in / dual out

    Electrical Specifications - Charger
    Output current (continuous at 25°C) 100 Amps 150 Amps
    Output voltage 12 Volts DC 12 Volts DC
    Output voltage range 5 - 16 Volts DC 5 - 16 Volts DC
    Charge control 3 stage with manual equalize 3 stage with manual equalize
    Charge temperature compensation Remote battery sensor (included) Remote battery sensor (included)
    Optmial Efficiency > 85% > 85%
    AC input power factor (maximum charge) 0.98 typical 0.98 typical
    Input current (for maximum charging) 16 A rms nominal 24 A rms nominal
    Input AC voltage 120 Volts AC 120 Volts AC
    Input AC voltage range 85 - 140 Volts AC 85 - 140 Volts AC
    Dead battery charge > 5 Volts DC > 5 Volts DC

    General Specifications
    Compatible battery types Flooded / gel / AGM* Flooded / gel / AGM*
    Transfer relay rating 1 leg of 30 A 2 legs at 30 A each
    Transfer time < 20 ms < 20 ms
    Optimal operating temperature range - 4°F to 140°F (- 20°C to 60°C) - 4°F to 140°F (- 20°C to 60°C)
    Storage ambient temperature range - 40°F to 185°F (- 40°C to 85°C) - 40°F to 185°F (- 40°C to 85°C)
    Unit dimensions (H x W x L) 7.75 x 13.5 x 15.25” (19.7 x 34.3 x 38.7 cm) 7.75 x 13.5 x 15.25” (19.7 x 34.3 x 38.7 cm)
    Unit weight 27.5 kg (60.5 lbs) 33.5 kg (73.7 lbs)
    Warranty 2 years 2 years
    Master carton dimensions (H x W x L) 11.8 x 17.1 x 20.5” (30 x 43.5 x 52.2 cm) 11.8 x 17.1 x 20.5” (30 x 43.5 x 52.2 cm)
    Master carton weight 30 kg (66 lbs) 35 kg (77 lbs)
    Part Number 815-2012 815-3012

    For more information:
    Xantrex Freedom SW 2012 and Freedom SW 3012 Data Sheet.
    Xantrex Freedom SW 2012 and Freedom SW 3012 Owner's Guide.
    Xantrex Freedom SW 2012 and Freedom SW 3012 Installation Guide.








Additional Information

    Additional Information

    Manufacturer Xantrex
    Data Sheet N/A
    Product Manual N/A