Blue Sea M-6011 Mini Battery Switch - Dual Circuit Plus™
Blue Sea M-6011 Mini Battery Switch - Dual Circuit Plus™
M-Series - Red - 300 Amp - Make Before Break
The Blue Sea Systems 6011 battery switch simultaneously switches two isolated battery banks or combines battery banks to all loads. In a typical application, when ON, the house battery bank is connected to the house load and the engine battery is connected to the engine, and when in the COMBINE position all batteries are connected together, for charging or emergency starting.
- Make before break contact design allows switching between battery banks without power interruption
- Ignition protected—safe for installation aboard gasoline powered boats
- Case design allows surface, front panel, or rear panel mounting
- Isolating cover with snap-on sections protects rear contacts
- 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
- Accepts 3/8" and M10 ring terminals
- 7/8" (22.22mm) stud length to accept multiple cable terminals
- Ideal for marine or RV applications
- All non-corrosive marine grade metals
- Molded in durable reinforced polycarbonate
- Tactile textures indicate knob position by feel only
- Label with international ON/OFF legends
- Removable key or knob remains positively retained
- ICON label set included for circuit identification
Model Number: | M-6011 |
Cranking Rating: 10 sec. | 1,000 Amps |
Cranking Rating: 1 min. | 650 Amps |
Intermittent Rating: 5 min. | 450 Amps |
Continuous Rating | 300 Amps |
Maximum Voltage Rating | 32 Volts DC |
Terminal Stud Size | 3/8"-16 (M10) |
Terminal Stud Torque | 120 in-lb max. |
Mounting Holes | Accept #10 Screw |
Mounting holes center-to-center | 3.0" (76.2mm) |
Diameter for cut out | 3.625" (92.08mm) |
Cable Size to Meet Ratings | 4/0 AWG (120mm²) |
Clearance For 4/0 AWG Cables | 1.12" (28.4mm) |
Weight Lb (Kg) | 0.80 (0.36) |